fine stranded solid fine stranded solid en 60 947-7-2/din vde 0611 t3 field/factory wiring wk 4 sl/u va 0.5 4 mm 2 0. 5? mm 2 800 v/8 kv/3* ) ** ) no. 22-10 awg no. 20-10 awg 6 mm 9 mm agihgrotufe+ q * w ** rdwv u wk 6 sl/u va 0.5 6 mm 2 0.5 10 mm 2 800 v/8 kv/3* ) ** ) no. 22-8 awg no. 20-8 awg 8 mm 12 mm agihgrotue+ q * w ** rdwv u 108 selos selos wk 4 sl/u 57.504.9055.0 100 wk 4 sl/u 2) 57.504.9055.0 100 35 x 27 x 7,5 en 60715 98.300.0000.0 1 35 x 24 x 15 en 60715 98.360.0000.0 1 9006 en 60715 g-32 98.190.0000.0 1 wk 6 sl/u 57.506.9055.0 100 wk 6 sl/u 2) 57.506.9055.0 100 35 x 27 x 7,5 en 60715 98.300.0000.0 1 35 x 24 x 15 en 60715 98.360.0000.0 1 9006 en 60715 g-32 98.190.0000.0 1 * cl i, zn1, aexe ii / **cl i, zn1, exe ii pending ul -ratings csa ratings width wire strip length approvals type part no. std. pack type part no. std. pack ground blocks type wk/wkn ... sl/u ground block with u-foot color: yellow/green eex e ground block with u-foot 1) accessories 1. mounting rail ts 35, din rail, 7.5 mm high l = 2 m mounting rail ts 35, din rail, 15mm high l = 2 m mounting rail ts 32, g rail l = 2 m 2. end clamp with u-foot 10 mm wide end clamp ts 35, with screw 8 mm wide end clamp ts 32, with screw 7.5 mm wide 3. end plate, 1.5 mm thick color: gray color: blue end plate, 2 mm thick color: gray color: blue 4. partition, 1.5 mm thick color: gray color: blue partition, 2 mm thick color: gray color: blue partition, 3 mm thick color: gray color: blue 5. cross connector with screws, e-cu insulated (jumper) 2pole 3pole to 12pole 6. single cover f. cross conn. with marking facility 7. snap-in partition plate with marking facility 8. cover strip for cross conn. over 10 blocks cover strip with warn. symb. over 4 blocks for more accessories see pages 160 -177 for marking systems see pages 178-179 and 200-202 * cl i, zn1, aexe ii / **cl i, zn1, exe ii pending * ) ratings to adjacent feed-through blocks of the same series and size ** ) for the current carrying capability of the mounting rail see section facts & data 1) eex e terminal blocks are subject to certification. the relevant indications in the certificate apply (e.g. 660v) 2) part certificates for eex e approval: eex e ii asev 91.1 b11638u enclosed design enclosed design
fine stranded stranded fine stranded solid/stranded fine stranded solid/stranded selos selos wkn 10 sl/u va 2.5 10 mm 2 1. 5?6 mm 2 800 v/8 kv/3* ) ** ) no. 16-6 awg no. 16-6 awg 10 mm 13 mm agihgrotue+ q * w ** rdwv u wkn 16 sl/u va 4 16 mm 2 1. 5 25 mm 2 800 v/8 kv/3* ) ** ) no. 12-4 awg no. 14-4 awg 12 mm 15 mm agihgrotue+ q * w ** rdwv u wkn 35 sl/u va 10 35 mm 2 10 50 mm 2 800 v/8 kv/3* ) ** ) no. 10-2 awg no. 10-2 awg 16 mm 20 mm agihgrotue+ q * w ** rdwv u 109 wkn 10 sl/u 57.510.9055.0 50 wkn 10 sl/u 2) 57.510.9055.0 50 35 x 27 x 7,5 en 60715 98.300.0000.0 1 35 x 24 x 15 en 60715 98.360.0000.0 1 9006 en 60715 g-32 98.190.0000.0 1 * cl i, zn1, aexe ii / **cl i, zn1, exe ii pending wkn 16 sl/u 57.516.9055.0 50 wkn 16 sl/u 2) 57.516.9055.0 50 35 x 27 x 7,5 en 60715 98.300.0000.0 1 35 x 24 x 15 en 60715 98.360.0000.0 1 9006 en 60715 g-32 98.190.0000.0 1 * cl i, zn1, aexe ii / **cl i, zn1, exe ii pending wkn 35 sl/u 57.535.9055.0 20 wkn 35 sl/u 2) 57.535.9055.0 20 35 x 27 x 7,5 en 60715 98.300.0000.0 1 35 x 24 x 15 en 60715 98.360.0000.0 1 9006 en 60715 g-32 98.190.0000.0 1 * cl i, zn1, aexe ii / **cl i, zn1, exe ii pending type part no. std. pack type part no. std. pack type part no. std. pack enclosed design enclosed design enclosed design
|
